Project: 

 Revenue Metering Design

 Service:

 Market Systems

 Location:

 South Island, New Zealand

 Client: 

 Meridian Energy

 Year:

 2010 – 2011

Overview

Meridian Energy Ltd had a PSI Quad 4+ based revenue metering platform at its hydro power stations in the South Island of New Zealand. Purchased in the early 1990s, the PSI Quad 4 revenue meters were once ‘state of the art’ but, while still providing reliable service, had become obsolete. New meters offered significant advantages with addit­ional functionality, far superior communications capability and re­duced routine maintenance.

Meridian Revenue Metering

 

PSC had previously carried out a detailed meter upgrade investi­gation for Meridian followed by a trial installation at the Tekapo A power station (project Phoenix). This was highly successful, and set the standard design and configuration pattern to be used at Meridian’s remaining power stations in the Waitaki Valley plus Manapouri. By this revenue metering upgrade, Meridian ensured full compliance with the mandatory requirements of New Zealand’s electricity market.

Waitaki  

The new metering installation is based around the Schneider Electric (formerly Power Measure-ment Limited) PowerLogic ION 8600 meters. These meters provide all of the required record­ing and storage capabilities, and separate data recorders are no longer required. All data connec­tions are made directly to these meters via their serial and LAN ports.

A separate aggregation meter is provided where aggregation to a station total is required. The meter LAN connection, using Modbus over TCP/IP protocol, is used by the aggregation meter to extract unit data for the station total.

Revenue data is extracted from the meters by STARK at half hourly intervals and also by ION Enterprise software at 1 second intervals, both via the LAN con­nection to the meters. Measure­ments to be displayed on SCADA and archived in PI Historian are extracted via RS485 links to station PLCs.

Project Outline

PSC was appointed by Meridian to carry out the detailed design of the metering installations, including supply of installation drawing sets, provision of meter setting parameters to the meter supplier (Quasar), commissioning plans, and QA inspection of the completed installation.

The meters provide compensation calculations for the transformer and line losses between the metering installation and the point of connection to the national grid. Unlike the existing Quad 4+ meters, the ION 8600 meters have the facility to enter the transformer and line losses separately. The ION meters also provide correction for both ratio and phase errors in CTs and VTs. Both corrections use a piecewise linear interpolation from the input data.

Outcome

The project was successfully carried out in 2010-11.

PSC’s engagement was extended in 2011 to modify the existing design of the Benmore installation to take account of generator circuit breaker and transformer equipment changes, and to bring the Benmore installation into line with the standard of the rest of the Waitaki valley.

PSC Services

Services provided included:

  • Detailed design
  • Design reports meeting electricity market requirements
  • Detailed installation drawings
  • Commissioning plans
  • QA inspections of completed installations
  • Design project management 

 

Follow us on

Follow us on Facebook Follow us on Linked In Follow us on YouTube